Indoor Metallic Powder Coat , Electrostatic Spray Epoxy Polyester
Powder Coating Paint
We are a professional supplier of powder coating and we worked in this field for many years
we provide many kind of powder paint, like a hammer, orange lines, grinding, highlights and inferior
smooth, crack, flash of gold, silver and other effects, have
appeared in recent years, high temperature resistant powder coating powder, powder painting at low temperature, high weather resistance, water resistance,
acid powder powder powder, low temperature curing, UV curing powder
powder and so on
Other name for this powder coating
Pure epoxy powder coating
Thermosetting powder coating
Electrostatic powder coating
Anti-environment powder coatintg
Non-toxic powder coating
Our powder coating is good quality we have UL,SGS ,ISO9001:2008
We supply powder coating to some big factory in China and other
1.Good adhesive force and excellent flexibility and other each
2.Good chemicals resistance and corrosion prevention
3.Be more excellent than heat-resistance and light resistant stability
of pure epoxy powder
4.Can be made into product with each brilliance and color; specific
color and brilliance should be designated by users
5. Can be made into each kind of texture product such as ripple,
hammer texture, metal effect, cotton like grain and crack etc.
Chemical type ; Epoxy/Polyester
Curing Condition ; 10-15 min/180oC-192oC
Adhesion ; 100%(ASTM D2794-93)
Hardness ; Minimum 1H-2H(ASTM D2134/93)
Erichsen Cupping ; Minimum 8 mm(DIN 53156)
Impact ; Direct ,minimum 50kg /cm2
; Reverse , minimum 40kg/ cm2
Flexibility ; Without Breaking
Salt Spray ; 500 hours (Zinc Phosfate),Pass no corrosion creep more
New and recycled ; 75% new -25% recycled, without texture loss nor
coating mixture Properties
Chemical Resistance ; Good for most acids,alkalines,alcohols and
oils at room
Use ; It is indicated for decorative and Protective end uses. It
appearance with improved heat stability and improved resistant
to Ultra violet light. these powder coatings are not recommended
Long term exposure to ultra violet light nor aggressive
All the Powders are Used for metal Furniture and This is a Raw
Power manufacturing Process:
- 1. Mix raw material and auxiliary material for 3-4 min.
- 2. Melt extrusion in the machine at the temperature of 110-120
- 3. Cooling to room temperature.
- 4. Grind the material to be particle.
- 5. Grind the particle to be powder.
- 6. Mix the powder with additives.(For special plastic powder)
- 7. Pack the powder to get the finished product.
Usage: Used us environmental coating instead of oil paint.
Other Quotation is what are the other Additives 2%: Additives
includes increased electric agent, defoamer, micro powder wax
Health & Safety:
1.No hazardous ingredient.
2.No hazardous gas.
3.The inhalation of dusts should be avoided. An operator should
wear an anti-dust mask and try best to avoid long time contact with
the powder coatings.
4.The coatings stacked on the skin could be washed with soap.
5.Requirement of environment protection: the product doesn’t
include arsenic, selenium, lead, hexavalent chromium, mercury,
stibium, cadmium and other heavy non-ferrous metals and is in fully
conformity with requirement of RoHS environment protection.